<< Click to Display Table of Contents >> Navigation:  PipeLay > Example PipeLay Models > Worked Example > Building the Model > Creating the Model >
Specification of Seabed and Water Depth

The Model component requires that a seabed and a water depth be specified before any other components can be added.

The Seabed drop-down list provides a list of all the Seabed components currently defined in the project. Of course, at this stage you have only one – Seabed – which you should select. Press the Water Depth button and set the water depth to the value given in Example 3. The component will then look as shown in the figure below.

Back to Creating the Model Overview

The next step in creating a model is to add a vessel to model. This is described in the 'Adding a Vessel' article.